REDi POD + | Full-Body Red Light Therapy Bed
REDi Bed Range — POD+

Full-body red light therapy. Professional grade.

The REDi POD+ delivers full-body photobiomodulation at professional output levels — built to your specifications, ready in 30–40 days.

⚡

Supports recovery

🔥

Eases muscle tension

💪

Supports skin health

🧠

Supports sleep and energy

🩺

Studied wavelengths

✦

Full-body coverage

In active clinical use

The REDi POD+ and REDi 360 Cave are both installed and operating at Reform Sports — Sports Injury Rehabilitation and Performance Recovery, Sunshine Coast QLD. Both units are used daily as working clinical tools across athlete rehabilitation and performance recovery protocols. Not a showroom. A working clinic.

The science

Why irradiance is the specification that matters most.

Irradiance is the amount of light energy delivered per unit area per unit time — it determines the dose a session actually delivers, which the photobiomodulation literature describes as the variable that matters rather than session length alone. The REDi POD+ delivers 80 mW/cm² measured at 15cm, from 3,500W across 21,600 LEDs and 320° of coverage. Most consumer devices do not publish an irradiance figure at all.

We don't ask you to trust us. We ask you to read the research. The REDi POD+ is built to deliver red and near-infrared light at the wavelengths, irradiance, and coverage described in peer-reviewed photobiomodulation literature.
Red — 633nm + 660nm
Surface delivery

Visible red wavelengths are absorbed in the surface layers of skin and muscle. 660nm is among the most studied wavelengths in photobiomodulation research, including for its role in recovery and comfort; 633nm sits in the range studied for skin appearance. Both independently controllable per session.

Near-infrared — 810nm + 850nm + 940nm
Depth and coverage

Near-infrared light reaches deeper than visible red — 5–10cm into muscle and connective tissue. 850nm is the most widely studied near-infrared wavelength in recovery research; 810nm and 940nm extend the range the unit can deliver. Five wavelengths in total, each independently controllable. Pulse frequency adjustable 0–10,000Hz.

What these wavelengths are studied for: Red and near-infrared light in this range has been studied extensively for its role in muscle recovery, comfort, and skin appearance.

Hamblin, M.R. (2017). AIMS Biophysics, 4(3), 337–361.

Dose and delivery: The literature describes a biphasic dose-response — what a session delivers depends on dose, not simply on how long it runs. Irradiance and output determine that dose, which is why both are specified on this page rather than left implied.

Leal Junior et al. (2020). Lasers in Medical Science.

The REDi POD+

Every specification exists for a clinical reason.

LED quantity

21,600 EPISTAR®

Professional-grade chips. 100,000-hour lifespan. Output consistency across years of commercial use — not the first 12 months.

Coverage

320° full body

Surround coverage delivers even irradiance across the entire body in a single session — not targeted zones requiring repositioning.

Output power

3,500W

Total output across 21,600 LEDs and 320° of coverage. Output and irradiance together determine what a session delivers — both are published here rather than left implied.

Irradiance

80 mW/cm² at 15cm

The measured figure at 15cm. Irradiance determines the dose a session delivers. The REDi Haven delivers 100 and the 360 Cave 129 — this is the specification that separates the range.

Wavelengths

633 · 660 · 810 · 850 · 940nm

Five wavelengths, independently controllable. Two visible red, three near-infrared — the range used most consistently across published photobiomodulation research.

Pulse frequency

0–10,000Hz

Adjustable duty cycle (0–100%). Pulsed delivery is used across published protocols where continuous output is not the intent.

Control

Touchscreen LCD + WiFi

Full protocol customisation from the panel. WiFi monitoring. Built-in Bluetooth audio for session comfort.

Dimensions

192 × 85 × 85cm · 120kg

Designed for spaces where full-size alternatives don't fit — without compromising output or coverage.

Warranty

3 years

Australian team. Direct contact. Not a ticket system. Commercial-grade build quality designed for high-volume operation over years.

Installation requirements: 220V single phase, 20 amp dedicated circuit with RCD (about 3,000W operating). Fits a room from 252 × 145cm. We review space and power requirements during the consultation — if there is a constraint, we identify it before you commit, not after.
Built to last

Overengineered by design.

What separates a device that performs for years from one that degrades within months is not visible in a product photo.

100,000h LED operational lifespan

EPISTAR® chips rated for 100,000 hours of operation. At 5 sessions per day, that is decades of consistent output — not the 12–18 month degradation curve of generic LED alternatives.

99% Light transmittance — UK Lucite® acrylic

The panel between the LEDs and your client determines how much light actually reaches the body. Lucite® delivers 99%. Generic acrylic in cheaper alternatives delivers 60–80% — reducing what a session delivers, invisibly and every time.

3yr Warranty — Australian team

A warranty is only as valuable as the team behind it. REDi is an Australian business. When you call, you speak to someone who knows your unit and can act. Response within one business day.

5 Five wavelengths, held accurately

633nm, 660nm, 810nm, 850nm, 940nm — the range used across published photobiomodulation research. Wavelength drift in lower-quality LEDs means the light delivered is not the light specified, regardless of stated output power.

AU Independently tested

Independently tested to IEC and EN electrical safety, photobiological safety and EMC standards. Test reports available on request. For a 3,500W device in a commercial or residential setting, independent testing is a baseline we can evidence on request — not a marketing line.

MTO Made to order

Every REDi POD+ is built to your specifications. Not pulled from a warehouse. Your unit, built for your space, your power configuration, and your requirements. The 30–40 day build timeline reflects that standard.

The investment

What it costs. What it replaces. What it generates.

Price follows the mechanism, specification, and build quality — because context changes what a number means.

REDi POD+ — investment
$34,999.00

Made to order. 30–40 day build and delivery. 3-year warranty. Australian support team.

For individual buyers: A red light therapy clinic session costs $60–$120. Three times a week, that is $780–$1,560 every month — and you own nothing at the end of it. Across three years the POD+ costs $972 a month of its own value. At the upper end of clinic pricing, owning it costs less than paying for the sessions. After that, the sessions cost you nothing at all.

For clinic and facility buyers: At 6 sessions per day at $80 across 20 operating days — $9,600 in monthly session revenue against $972 a month of asset cost. Under four months of operation covers the investment in full. The remaining warranty life is margin.

The threshold

One client a day covers it.

Across the three-year warranty the POD+ costs about $32 a day to own. A single $80 session covers two and a half of those days. Run one client a day across twenty operating days and the unit has paid for itself — before you have touched the other five slots.

1 a day

$1,600 a month at $80 a session — against $972 of monthly asset cost

$9,600/mo

At six a day. Everything past the first session is margin

Session volumes and pricing are illustrative and based on the figures above. Daily and monthly asset cost is the purchase price spread across the three-year warranty period, and excludes running costs, staffing, and premises. Commercial equipment financing is available through established partners for qualifying buyers — terms are set by your lender.

Bring your own numbers to the consultation call. We will run them with you honestly, including the case where the POD+ does not stack up for your volume.

After you commit

What happens between order confirmation and first session.

Equipment at this level arriving at your facility is not a routine delivery. Here is every step of the process.

01 Specifications confirmed

Dimensions, power configuration, delivery access, and installation requirements confirmed in writing before build begins. No surprises on delivery day.

02 Build — 30–40 days

Hand-built to your exact specifications. Build progress updates at key milestones. Full quality inspection before despatch.

03 Delivery and setup

Delivered with full setup documentation, clinical use guide, and recommended starting protocols. REDi team available on delivery day.

04 3 years of support

Direct access to the REDi team throughout the warranty period. Not a ticket system. If something needs attention, you speak to someone who can act — and will.

What the warranty means in practice: Component failures under the 3-year warranty are assessed, sourced, and replaced directly by the REDi team. Site visits coordinated where needed. Unit replacement under warranty where applicable. You call us. We respond within one business day. Not an overseas queue — an Australian team accountable to every unit they have sold.

Ready to talk — we are.

Call, WhatsApp, or email. No automated responses. No sales team. Just the REDi team, responding personally within one business day.

The range

Where the POD+ sits — and when to consider stepping up.

We will tell you which is right for your situation on the consultation call.

Specification REDi POD+ — $34,999 REDi Haven — $44,999 REDi 360 Cave — $79,999
LEDs21,60026,88042,000
Coverage320°320° curved360° full immersion
Pulse range0–10,000Hz0–10,000Hz0–10,000Hz
Irradiance at 15cm80 mW/cm²100 mW/cm²129 mW/cm²
Session20 min10 min15 min
ControlTouchscreen + WiFiDual: front-desk + appDual control
Dimensions192 × 85 × 85cm214 × 108 × 88cm225 × 116 × 108cm
Power220V · 20A + RCD220V · 32A220V · 32A
Warranty3 years3 years3 years
Before you book the call

Questions we get asked.

Is the research real — or is it overstated?
Photobiomodulation has a large peer-reviewed literature, and the wavelengths the POD+ delivers are the ones most consistently used across it. What we will not do is tell you what the device treats — we are not registered to make therapeutic claims and we do not make them. What we will tell you is what the unit delivers, at what irradiance, at what wavelengths, and point you to the research so you can form your own view. Ask before the call and we will send the key studies.
How is this different from cheaper alternatives — specifically?
Four measurable differences: LED quality (EPISTAR® chips rated to 100,000 hours vs generic chips that degrade within 12–18 months), panel transmittance (99% Lucite® vs 60–80% generic acrylic), wavelength accuracy (the specified wavelengths, held, rather than approximate), and independent testing to IEC and EN electrical safety, photobiological safety and EMC standards, with local warranty and support. Most cheaper alternatives do not publish an irradiance figure at all — the POD+ delivers 80 mW/cm² at 15cm.
Can I finance the purchase?
Yes. Commercial equipment financing is available through established finance partners for qualifying clinics, facilities, and private buyers — so you deploy the asset from day one while preserving working capital. Rates and terms are set by the lender against your circumstances, so we do not quote them here. Raise it on the call and we will connect you with the right options for your situation.
What exactly happens if something fails under warranty?
You contact the REDi team directly. We assess, determine warranty coverage, and act. Component failures are replaced. Site visits coordinated where needed. Unit replacement under warranty where applicable. Direct contact, response within one business day. Not a portal. Not an overseas queue.
How quickly do people tend to notice something?
Most people report that recovery feels easier within the first week or two of consistent use, and changes in skin appearance are typically noticed over six to eight weeks. This varies between individuals and depends on how consistently sessions are run — we are describing what users report, not promising a result. One session shows you the experience. A month shows you whether it belongs in your routine.
What are the exact installation requirements?
220V single phase, 20 amp dedicated circuit with RCD (about 3,000W operating). Fits a room from 252 × 145cm. 120kg unit weight. Your electrician sizes the cable; we confirm the exact electrical requirement for your site during the consultation — if there is a constraint, we identify it before you commit, not after.
Ready when you are

Book a private consultation.

A 20-minute call with the REDi team. We will cover whether the POD+ is the right fit for your space and requirements, what a realistic ROI looks like for your situation, and what the acquisition process looks like from here.

We will tell you if it is not right for your situation.

We respond to all enquiries within one business day.

Or call us directly: +61 475 847 968